S340 Engines start


I bought the S340 it is very nice, but I found an issue when I start the engines.

Following the normal starting procedures, the torque meter is rising over the normal operational range, staying in that position for a while, spinning the aircraft.


Thank you for your feedback.

We know about this issue, we are working on solve this as soon as we can.

This is happening only on P3D and the only procedure for now to prevent this, is selecting COLD AND DARK option from the menu (SHIFT 5 or SHIFT 7 depending if you have GTN installed or not) and then selecting an engine start option from that menu.

Sorry for the inconveniences this is causing.

Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk